DENNARD 2060 PDF
Dome Camera Installation Manual Weatherproof and Indoor versions www. Contents Introduction. Menu System Manual. Page 4 of 1. THE DENNARD TYPE DOME CAMERA. The Dennard Dome Camera is a precision unit, offering a wide. The Dedicated Micros Camera has a number of features which can be selected by the System. Supervisor when the dome is installed. Any of these can be.
|Published (Last):||20 March 2016|
|PDF File Size:||8.43 Mb|
|ePub File Size:||12.1 Mb|
|Price:||Free* [*Free Regsitration Required]|
DEDICATED MICROS INSTALLATION MANUAL Pdf Download.
This product is marked with the CE symbol and indicates compliance with all applicable directives. Open the Technician menu see Operation and Programming manual for details on accessing the menu.
Control up the coax – This is most likely due to too much or too little video gain. Video The co-ax and power wires are always connected, the RS wires are only connected when an external protocol converter is fitted or an RS controller is being used.
Remove the selected tile that will have the dome mounted dennarr it. Page of 36 Go. The location of the switches is also shown.
Twist once located to secure, then tighten screw heads C to secure the dome enclosure to the mounting disk. Operating Temp o C: Radiated Emissions Standard, suitable for Commercial or Residential use. The mechanism has been designed to fit within the existing housing allowing it to remain compatible with the wide range of Dennard accessories and brackets.
The weight of dome denanrd be supported by bond ensuring no stress is placed on centre connector drnnard any time. The monitor shows nothing but scrolling lines but I do see a flicker when I drive the joystick.
Dedicated Micros 2060 Installation Manual
Offer the bracket base casting into position and fasten to the wall using appropriate fixings. Fit the supplied safety bond E to an attachment point in the ceiling. DM with rx domes are delivered with the address switches set at I have fitted a BNC connector to cennard pigtail from the camera for UTC controlattached to the controller and patched to the monitor but I get no picture and cannot see any activity from the dome when I select the camera and move the joystick.
Attach the mounting disc A to the dome in the chosen position and use 3 of the existing M4 dome hd screws to attach the hemisphere to the dome. Lift the dome to the bracket flange ensuring head of screws pass through the keyhole slots.
Dennard Dedicated Micros D PTZ Dome Camera CCTV | eBay
Introduction Introduction The Dedicated Micros camera is a precision unit, offering a wide variable speed range, together with a large pre-set memory for positions, tours and alarm responses.
Finally secure the plastic cover to the metal pins on the bracket flange.
Ensure the safety bond is fitted. Clip safety bond to the mounting bracket eyelet on flange of bracket to secure. The desired protocol and the node address for the dome are selected by the two rotary hex switches blue and yellow inside the dome. This will provide a noticeable improvement in camera performance at both the wide and telephoto end of the lens zoom range. Optimised compatibility with Dedicated Denard controllers.
Sign In Sign Up. Attach bond to a suitable secure position in the ceiling void. Attach safety bond to a suitable secure position in the ceiling void.